In some large buildings musical tones fade away in a pleasant echo, while speech is nearly impossible to understand. Even though religious music plays an important role during services, a congregation must also hear the spoken message without having to unnaturally strain. Acoustic sound panels for churches solve this problem by focusing the individual vibrations, making them easier for people to hear and understand.
Some European cathedrals are noted for their lush reverberation, but a very fine line separates a pleasant echo from a noisy, irritating mix of garbled words. Most reverberation is caused by noise bouncing off of hard surfaces such as walls and ceilings. Although there are some buildings that take acoustics into account in their original design, many churches are located in structures that have been re-purposed.
Even without the benefit of modern computer analysis, there have been several methods historically used to correct the problem. Some included the addition of ash to clay pots located at strategic points withing a room. They were moved about, and burnt material was added or removed to dampen specific reverberations. Support pillars that dominated some buildings were specifically altered, and stone blocks specially sized to inhibit echo.
Today, solutions range from installing carpeting in strategic areas to using high-tech electronic reverberation systems that create a variety of listening environments. Both are effective, but neither can completely solve echo or muffling problems that are actually a product of the original building design. For many structures, a mixture of methods that also emphasizes special flat baffles creates the best results.
These structures are not used to block or eliminate words or music, but rather to absorb unwanted excess, usually within a single room. Most incorporate the same basic design method, featuring an inner filling made of absorbent material, a frame, and a covering. The filling may consist of various synthetic foams or fiberglass, or may utilize newer, more environmentally friendly substances.
Their size depends the extent of the echo and distortion. Some are as small as four square feet, while others may be nearly wall-sized, and most solutions require combinations. No matter their dimensions, they allow vibrations to pass through the exterior material rather than bouncing off, and any waves that return are re-absorbed. This principle is the same one used by music studios to emphasize accuracy, and can be easily adapted to churches.
Instead of seeming like an ugly industrial installation, these baffles easily adapt to the desired interior look of a church. Some re-create the existing patterns of stained glass in the windows, or can mimic or repeat patterns or colors in ceilings and walls. While they are visually uninteresting without decoration, a professionally designed grouping normally fits in well, and can even feel like part of the original decor.
While it is possible to precisely position or arrange them for the best absorption and diffusive characteristics using computer analysis, most are placed using the expert imaging made possible by the human ear. Once that sweet spot has been found, they are permanently attached. Rather than deadening volume or preventing certain frequencies from being heard, these structures clarify music and speech.
Some European cathedrals are noted for their lush reverberation, but a very fine line separates a pleasant echo from a noisy, irritating mix of garbled words. Most reverberation is caused by noise bouncing off of hard surfaces such as walls and ceilings. Although there are some buildings that take acoustics into account in their original design, many churches are located in structures that have been re-purposed.
Even without the benefit of modern computer analysis, there have been several methods historically used to correct the problem. Some included the addition of ash to clay pots located at strategic points withing a room. They were moved about, and burnt material was added or removed to dampen specific reverberations. Support pillars that dominated some buildings were specifically altered, and stone blocks specially sized to inhibit echo.
Today, solutions range from installing carpeting in strategic areas to using high-tech electronic reverberation systems that create a variety of listening environments. Both are effective, but neither can completely solve echo or muffling problems that are actually a product of the original building design. For many structures, a mixture of methods that also emphasizes special flat baffles creates the best results.
These structures are not used to block or eliminate words or music, but rather to absorb unwanted excess, usually within a single room. Most incorporate the same basic design method, featuring an inner filling made of absorbent material, a frame, and a covering. The filling may consist of various synthetic foams or fiberglass, or may utilize newer, more environmentally friendly substances.
Their size depends the extent of the echo and distortion. Some are as small as four square feet, while others may be nearly wall-sized, and most solutions require combinations. No matter their dimensions, they allow vibrations to pass through the exterior material rather than bouncing off, and any waves that return are re-absorbed. This principle is the same one used by music studios to emphasize accuracy, and can be easily adapted to churches.
Instead of seeming like an ugly industrial installation, these baffles easily adapt to the desired interior look of a church. Some re-create the existing patterns of stained glass in the windows, or can mimic or repeat patterns or colors in ceilings and walls. While they are visually uninteresting without decoration, a professionally designed grouping normally fits in well, and can even feel like part of the original decor.
While it is possible to precisely position or arrange them for the best absorption and diffusive characteristics using computer analysis, most are placed using the expert imaging made possible by the human ear. Once that sweet spot has been found, they are permanently attached. Rather than deadening volume or preventing certain frequencies from being heard, these structures clarify music and speech.
About the Author:
When you need information about acoustic sound panels for churches, pay a visit to the web pages online here today. You can see details at http://www.mixmasteredacoustics.com now.